# Custom Streetwear Shorts Manufacturing Guide

Source: https://rightgateglobal.com/blog/custom-streetwear-shorts-manufacturing-guide

Published 2026-11-14

How to define the shape and functional details of custom shorts before sample development and bulk approval.

The shape of streetwear shorts depends on more than inseam length. Rise, waist position, thigh width and leg opening determine how the garment sits and moves. Begin with those proportions, then add material, pockets and branding to the brief.

## Decide where the shorts should sit

Show the intended waistband position and hem level on the reference or drawing. Record waist, hip, rise, inseam, outseam and opening at agreed points. These dimensions explain the design more precisely than a description such as above knee or relaxed.

Review the sample standing and seated. A waistband placed differently during fitting can make the same garment look longer or shorter. Use a consistent wearing position when comparing versions, then record whether a change concerns rise, length or leg width.

## Match material to the intended garment

Identify whether the design uses jersey, terry, fleece, a woven material or another proposal. Include composition, weight where relevant, inside finish and color. Compare physical material with the intended silhouette rather than selecting the heaviest option by default.

Ask to see the material at waistband and pocket joins as well as in a flat swatch. If washing or another finish is part of the design, include it in the approval scope and review the garment at the intended finished stage.

## Define waist construction and adjustment

State whether the waist uses elastic, a fixed waistband, a drawcord or a combination. Include finished height, measurement method and front opening details where relevant. Show cord exit positions and specify its ends and attachment arrangement.

Check the waistband while sitting and walking. Review how it sits against the intended wearer and whether the construction creates an unwanted bulky area. A drawcord should not be treated as a substitute for specifying the fit of the waistband itself.

## Draw the pocket arrangement

List front, rear and cargo pockets separately. Show opening width, bag depth, placement and closures. Identify which pockets are functional and which details serve only the design. For a cargo style, include flap or gusset construction rather than relying on a front photograph.

Test access with ordinary intended use. Check whether the bag shows below the hem, pulls across the thigh or alters the leg shape. Record the issue at its source; changing the entire garment width may not answer a pocket-depth or placement concern.

## Specify hems, panels and decoration

Show the hem finish and any side opening, contrast panel or piping. If left and right legs differ by design, make that explicit on the drawing. Review panel joins and hem level on the sample from front, side and back.

List artwork dimensions and locations measured from garment points. If the logo sits near a pocket or hem, show that relationship clearly. Discuss how the location is handled across sizes and review the application on the selected material.

## Review the sample as a complete product

Use these checks before approval:

- Waist position and garment length.
- Rise, thigh and leg opening.
- Movement when seated and walking.
- Pocket access and bag placement.
- Material, color and finished appearance.
- Hem, panels and internal seams.
- Drawcord, decoration and label versions.

Keep changes tied to the same chart version and style reference. If the shorts are part of a matching set, identify the shared color and branding requirements while keeping their fit sheet separate from the top.

## Review the length together with the rise

Suppose you want an above-knee short but the sample appears longer than expected. Compare the waistband position, front and back rise and inseam before changing the hem. A different rise can alter the worn length even when an inseam value matches the original chart.

Show the intended silhouette on a fit reference and identify the sample size. Review the shorts standing and seated, then compare their flat measurements. Note where extra room is wanted: seat, thigh, lower leg or throughout the garment.

For an elastic waist, state the measuring condition and construction. Include waistband height, drawcord details and the hem opening. A short style name does not tell the manufacturer how those proportions should relate.

## Match pocket depth to the garment

Pocket opening and bag depth need to be checked against the short length. Show the inside construction and how the pocket should sit when the garment is worn. If the bag uses a separate material, include it in the component references.

For cargo or mesh styles, identify the particular pocket and lining arrangements rather than reusing a basic jersey short brief. Ask which components the sample represents and whether any part is temporary. Keep the open items visible during the fit review.

Inspect pocket access and inside finishing alongside the overall silhouette. A pocket change may affect artwork space or panel construction, so update the drawing and placement instructions where relevant.

## Compare a coordinated top without copying its specification

If the shorts belong to a set, review the proposed shade and texture against the top. They may use the same fabric reference or different materials chosen to coordinate. Identify that relationship clearly and ask how it will be reviewed on the complete garments.

Give each application its own dimensions and location. A chest graphic and a leg graphic can share artwork without sharing the same scale. Check the artwork on the actual sample and specify any differences across sizes or colourways.

Read the garment charts beside the quantity and packing plan. State whether pieces are ordered and packed as sets or separately. The final short brief then covers fit, function, branding and coordination, while leaving material availability and commercial terms to the quotation for the actual project.

Ask for quantities by style, color and size, with sample terms and delivery scope named in the quotation. The [cut and sew guide](/custom-cut-and-sew-manufacturing) covers original patterns, and [sampling and development](/sampling-and-product-development) explains how to record revisions. [Send a shorts brief](/request-a-quote) with the construction details and quantity breakdown you want reviewed.
