# Custom Hoodie Manufacturing Guide: Fabrics, GSM, Fit and Branding

Source: https://rightgateglobal.com/blog/custom-hoodie-manufacturing-guide

Published 2026-11-20

The garment decisions needed for a custom hoodie, from its inside fabric finish to the shape of the hood and pocket.

A hoodie specification needs more than a fabric weight and logo. The body, hood, pocket, cuffs and hem each contribute to how the garment fits and feels. Start with the intended silhouette, then describe the construction of those parts before discussing decoration.

## Choose the inside finish deliberately

Brushed fleece and loopback terry describe different inside surfaces. Ask to review the actual material being proposed, alongside its composition, weight and color. Do not assume a fabric name identifies the exact feel or performance of every available option.

Explain how the hoodie will be worn: against a T-shirt, as a light layer or over another top. That gives context for material and fit review. Keep the swatch reference with the garment specification so an approved color is linked to the right fabric.

## Set the body and sleeve proportions

Record chest width, body length, shoulder position, sleeve length and openings. Say where each measurement is taken. A relaxed hoodie and a cropped oversized hoodie may need quite different proportions even if both have dropped shoulders.

Review the garment with the intended base layer. Check reach through the shoulders and how the hem sits when the arms move. If you alter the sleeve or armhole, review the worn sample again rather than judging only the flat measurements.

## Specify the hood as its own component

Describe hood depth, height, opening and panel construction. State whether it is self-fabric, lined or built with another proposed arrangement. If a drawcord is required, include its material, length, ends and exit positions; if it is not required, make that clear too.

Look at the hood both raised and lowered. Check its balance at the neckline, face opening and seam finish. A good body fit does not establish that the hood sits as intended, so keep hood feedback separate in the revision list.

## Detail pockets, cuffs and hem

For a kangaroo pocket, show its width, height and placement. Review opening size, access and the inside finish. For zip hoodies, identify the pocket arrangement and how it connects to the front opening. Check that pockets remain balanced when the garment is worn.

Name the proposed cuff and hem material, including the rib if used. Record finished dimensions and review the amount of gathering at the joins. A matching color reference should be checked across body and rib materials, rather than approved only from digital artwork.

## Plan a zip front if the style needs it

A zip hoodie needs a fastening specification, front construction and neckline detail. Identify the zipper type and the intended finished opening. Review the zipper's operation and how the front lies when open and closed.

Show any print or embroidery that sits near the fastening on the placement drawing. If a graphic spans both front panels, review the alignment on the actual assembled garment. Treat the zipper and decoration together when assessing the front appearance.

## Build the branding schedule

List artwork size and placement for each application, then include brand, size and care labels. Pockets, seams and thick joins can affect where decoration sits, so show the proposed location clearly. Ask to review the intended method on the selected fabric.

Use this sample checklist:

- Body, shoulder and sleeve measurements.
- Inside fabric finish and approved color.
- Hood shape, opening and lowered position.
- Pocket access and alignment.
- Cuff and hem dimensions and finish.
- Fastening operation, where relevant.
- Decoration, labels and inside construction.

## Build a component sheet for the hoodie

Treat the hood, body, sleeves, rib and pocket as connected components with their own requirements. For a pullover, define the neck opening and hood attachment alongside the body chart. For a zip style, include the zip type, length and opening reference. A front sketch does not show every inside construction decision.

If the hood uses a separate lining, identify that material and its intended coverage. Show the hood depth, opening and any panel seams. Explain whether a drawcord is required and include its exits and ends for review. The finished hood should be assessed on the garment rather than approved only as a separate component.

Pocket requirements need dimensions, location and construction. A front pouch, separate side-entry pockets and a zipped pocket describe different arrangements. Mark the openings on the drawing and explain whether decoration sits above, beside or across the pocket area.

## Resolve a sleeve and cuff issue

Suppose the sleeve length matches the chart but the cuff sits differently from the reference. Check the cuff dimensions, attachment and material before shortening the sleeve. The appearance may relate to the cuff construction or how the garment sits at the shoulder.

Try the sample with the intended layer underneath. Review reach, wrist position and movement, then compare the flat values. Record which part needs changing. A note asking for a better fit does not identify whether the body, sleeve, cuff or shoulder is responsible.

If the cuff or hem rib changes, compare its shade and recovery with the body fabric again. Keep the proposed component identifiable so a later sample is not assessed against a different trim without explanation.

## Bring branding into the garment review

For a front graphic, check the space created by the neckline, zip and pocket. Record artwork dimensions and the points used to locate it. For back decoration, show whether the placement is measured with the hood resting down or from a specified seam reference.

Review the inside of embroidered areas as well as the visible artwork. Include label attachment positions and their relationship to the hood seam. These checks make the complete sample more informative than a garment photograph with a logo overlaid on it.

Before approval, compare the component sheet with the current sample. Mark each accepted item and any exception, then keep that sheet with the chart and artwork files used for the next stage.

Keep revisions specific to a component or measurement. Use the [sampling service guide](/sampling-and-product-development) to plan the approval stages, then [request a hoodie quote](/request-a-quote) with the garment sheet, branding details, quantity breakdown and delivery country.
